Donnelly RLS Tile Leveling Base Clip Joint 1/32" - 300/Bag

The Raimondi LS300CLIP132 is a 300-piece bag of 1/32-inch (1 mm) tile leveling base clips. This product represents the "New Version" (often classified under the RLS NV series) of Raimondi's standard tile leveling ecosystem, engineered to eliminate tile height variances (lippage). 

Key Functional Features

• Ultra-Thin Spacer Baseline: Provides a 1/32-inch (1 mm) grout joint width

, which is the thinnest joint profile available in the Raimondi Leveling System. It is ideal for rectified porcelain, large-format tile, and seamless stone layouts. 

• Thinset Embedded Base: The base plate of each clip slides underneath the edge of the tile directly into the thinset mortar. 
• Downward Flattening Action: When a compatible RLS wedge is inserted into the top loop of the clip and tensioned, the clip pulls the sub-base tightly upward, actively pushing adjacent high tile edges downward into the thinset bed until they sit on a perfectly flat plane. 
• Clean Fracture Point: Engineered with built-in intentional stress-weakness lines right at the bottom edge. Once the thinset completely cures, the exposed loops can be cleanly snapped off below the tile surface by kicking them or striking them with a rubber mallet parallel to the grout joint. 

Technical Specifications

• Quantity: 300 clips per bag.
• Grout Joint Spacing: 1/32 inch (1 mm).
• Tile Thickness Capability: Accommodates tiles ranging from 1/8" (3 mm) up to 1/2" (12 mm) thick.
• System Component Requirements: Requires Raimondi RLS Wedges and RLS manual tensioning olier tool to apply consistent lock-in pressure.